Apparently a lot of the current World of Warcraft Classic closed beta testers are reporting things as bug that, well, simply aren't. There are enough of them, in fact, that Kalvax, the Classic community manager, posted a lengthy "Not a Bug" list on the forums. Some of the things that are actual features in the game include Tauren melee reach and hitboxes are larger than other races, Warrior health regen is working as intended and creature respawn rates are "much slower".


* Financing available is "Equal payments, no interest" for 12 months (unless otherwise stated) available on request, on approved credit on purchases of $200 or more (excluding gift cards) made with your Triangle credit card at Canadian Tire. Interest does not accrue during the period of the plan. You must keep your account in good standing to avoid interest at your applicable regular annual rate on the plan balance. No administration fee. For full terms and conditions visit https://www.canadiantire.ca/content/canadian-tire/en/customer-service/policies.html#termsandconditions.


Dec 28, 2016 Better Living through Technology!(new2macros) *note: this guide is for people who haven't used macros or advanced keybinds and want to try. Macros are basically 'super buttons' that you can create in order to use multiple abilities and spells from the same button. This means even if you have 15 different abilities, you can key them all to 3-5 buttons. With macros you can do things like: 1) have all your buff spells on one button 2) 'hide' abilities that you don't use very often so they only show when you need them 3) 'group' similar abilities so that, for example, all your commonly used melee skills are on one button 4) maximize your rotation so that you're always one step ahead of the GCD Macros are great, but there are a few limitations: 1) complicated! -learning macros takes a good chunk of time. It's only something I've been able to do since my work gives me some 'free time' to cruise the UI/macro forum. 2) software limited -While very powerful, there is potential to abuse macros so that, for example, you could hit one button and your character would kill every mob in range (eventually). This potential for abuse has cause blizzard to put some powerful limitations on macros. More about this later. 3) the One Button rule -each macro button can use only one ability each time you press the button. You can code this so that it will use a different ability each and every time you press it (and on a different target!), but you can't press the button once and, for example, have it cast all 5 self buffs on you. I don't even know where to start?! To get started with macros, it's very simple. Just log on WoW and type /m. This brings up your macro box, where you just have to hit 'new' and the game will prompt for a name and an icon. I recommend that you leave the icon as a question mark. (?) The question mark means the game will automatically pick up the picture of the ability that the macro will use. My First Macro For your first macro lets just replace a normal ability you use on your bar in combat. I'm going to use paladin abilities here, but you can replace them with whatever ability you like. So to make my first macro, I went to the /m menu in game, picked a new macro, and gave it the question mark icon. Then I click on the icon, click on the empty box, and type: /cast This is the basic core of every macro. It's basically like the verb in a sentence. You can use different 'verbs' (called slash commands) but this is probably the most popular. Since I want this macro to cast Hammer of the Righteous, I simple type that in after the /cast. /cast Hammer of the Righteous And pow! I'm done! If you drag this onto your bar and hit it a million times, you basically have the paladin protection spec in a nutshell (lol). However this doesn't really give you any extra functionality over a normal keybind. The next thing I'm going to do is make the macro heal a friendly if I have a friendly targeted, or if it's an enemy it will use SotR (shield of the righteous). To do this you add a conditional. This says 'only cast this spell if 'X' is true.' It looks like this (with a breakdown of the macro underneath): /cast [help] Word of Glory; [harm] Shield of the Righteous \__/ \____/\__________/\/ \____/\__________________/ verb-conditional---|---separator|----------------| -------------------ability---------conditional----Ability What this macro will do is check the status of your current target. A 'friendly'(help) value will cause my paladin to heal the target. An 'enemy'(harm) value will trigger the attack ability. If you can grasp macros thus far, you've already learned enough to make macros useful for you. Putting this on your bar will basically cut the number of keybinds you need by 1. Modifier macro commands Another handy feature you can use with macros is called a Modifier. This may sound familiar but it's possible to set a macro so that it will use a different ability or spell if you hold down control, alt, or shift. Here's a basic example: /cast [mod:alt] Seal of Truth;[mod:ctrl] Blessing of Kings;[mod:shift] Righteous Fury; Seal of Insight If you had this macro bound to 1, and you press 1, it would cast Seal of truth (and the seal picture would be on the keybind). Pressin ctrl would change the icon to blessing of kings and would cast blessing of kings if you pressed ctrl-1, etc....Raygecow149 Dec 28, 2016
Dec 28, 2016 Better Living through Technology!(new2macros) *note: this guide is for people who haven't used macros or advanced keybinds and want to try. Macros are basically 'super buttons' that you can create in order to use multiple abilities and spells from the same button. This means even if you have 15 different abilities, you can key them all to 3-5 buttons. With macros you can do things like: 1) have all your buff spells on one button 2) 'hide' abilities that you don't use very often so they only show when you need them 3) 'group' similar abilities so that, for example, all your commonly used melee skills are on one button 4) maximize your rotation so that you're always one step ahead of the GCD Macros are great, but there are a few limitations: 1) complicated! -learning macros takes a good chunk of time. It's only something I've been able to do since my work gives me some 'free time' to cruise the UI/macro forum. 2) software limited -While very powerful, there is potential to abuse macros so that, for example, you could hit one button and your character would kill every mob in range (eventually). This potential for abuse has cause blizzard to put some powerful limitations on macros. More about this later. 3) the One Button rule -each macro button can use only one ability each time you press the button. You can code this so that it will use a different ability each and every time you press it (and on a different target!), but you can't press the button once and, for example, have it cast all 5 self buffs on you. I don't even know where to start?! To get started with macros, it's very simple. Just log on WoW and type /m. This brings up your macro box, where you just have to hit 'new' and the game will prompt for a name and an icon. I recommend that you leave the icon as a question mark. (?) The question mark means the game will automatically pick up the picture of the ability that the macro will use. My First Macro For your first macro lets just replace a normal ability you use on your bar in combat. I'm going to use paladin abilities here, but you can replace them with whatever ability you like. So to make my first macro, I went to the /m menu in game, picked a new macro, and gave it the question mark icon. Then I click on the icon, click on the empty box, and type: /cast This is the basic core of every macro. It's basically like the verb in a sentence. You can use different 'verbs' (called slash commands) but this is probably the most popular. Since I want this macro to cast Hammer of the Righteous, I simple type that in after the /cast. /cast Hammer of the Righteous And pow! I'm done! If you drag this onto your bar and hit it a million times, you basically have the paladin protection spec in a nutshell (lol). However this doesn't really give you any extra functionality over a normal keybind. The next thing I'm going to do is make the macro heal a friendly if I have a friendly targeted, or if it's an enemy it will use SotR (shield of the righteous). To do this you add a conditional. This says 'only cast this spell if 'X' is true.' It looks like this (with a breakdown of the macro underneath): /cast [help] Word of Glory; [harm] Shield of the Righteous \__/ \____/\__________/\/ \____/\__________________/ verb-conditional---|---separator|----------------| -------------------ability---------conditional----Ability What this macro will do is check the status of your current target. A 'friendly'(help) value will cause my paladin to heal the target. An 'enemy'(harm) value will trigger the attack ability. If you can grasp macros thus far, you've already learned enough to make macros useful for you. Putting this on your bar will basically cut the number of keybinds you need by 1. Modifier macro commands Another handy feature you can use with macros is called a Modifier. This may sound familiar but it's possible to set a macro so that it will use a different ability or spell if you hold down control, alt, or shift. Here's a basic example: /cast [mod:alt] Seal of Truth;[mod:ctrl] Blessing of Kings;[mod:shift] Righteous Fury; Seal of Insight If you had this macro bound to 1, and you press 1, it would cast Seal of truth (and the seal picture would be on the keybind). Pressin ctrl would change the icon to blessing of kings and would cast blessing of kings if you pressed ctrl-1, etc....Raygecow149	Dec 28, 2016 

The World of Warcraft is going back to its roots with WoW Classic. Giving players the chance to return to the game as it was around the time of its launch, WoW Classic is set to launch worldwide on August 27. However, ahead of its imminent release, the team at Blizzard are offering a closed beta test for WoW Classic, and we've got all the details players need to jump in on the action.
Apr 2, 2018 [Guide] WoW Game Tokens *****UPDATE TO WOW TOKENS***** Effective: February, 6th, 2017 You can now use WoW Tokens for Battle.net Balance when you purchase one off of the AH. You may find further information on this new update to the WoW Token System here! Trade a WoW Token for Battle.net Balance: https://worldofwarcraft.com/en-us/news/20542016 *****Original Version of this Guide***** Hello to all new and veteran World of Warcraft Players! Welcome to my extensive guide regarding the new World of Warcraft Game Tokens! :-) Which Patch did World of Warcraft Game Tokens launch?: The World of Warcraft Game Tokens were launched in World of Warcraft on April, 7th, 2015. When will the Game Tokens be available to World of Warcraft Players?: Game Tokens started to roll out first on realms that are serving (North America, Oceania, and Latin America). After this it had become expanding to other regions in weeks after the release of Game Tokens on North American Realms. What is the cost for World of Warcraft Game Tokens?: For Canadians the price is $25.00 CAD For New Zealand residents the price is $32 NZD ($23 USD) here, which includes 15% GST For U.S. Residents the price is $20.00 USD Where can I purchase the World of Warcraft Game Token?: You can purchase the WoW Game Token from the in-game shop. If you choose to purchase it for usage on your Battle.net Account from the Auction House there will be a new tab called "Game Time". WoW Tokens will be listed at a base price of 30,000 gold. However note though that the price for WoW Tokens can go below 30,000 gold or climb up in price. Prices are based on demand for these tokens. How much times may you use the WoW Game Token?: You may use the token ONLY on the Auction House! Once it's sold it is Soul Bound to the buyer and can only be used (1) time to redeem for game time for your World of Warcraft account. Once sold as well the seller will receive the gold they sold it for! Can I set my own price for the token when selling on the Auction House?: At this time, Blizzard has stated upon listing it onto the Auction House, A pre-set price determined by Blizzard will be the listing price. This price may go up or down pending on the sale(s) of the WoW Token in each region. You cannot at this time set your own personal price for the WoW Token! The current price you sell the WoW Game Token for in the Auction House is set at 30,000 gold. However note though that the price for WoW Tokens can go below 30,000 gold or climb up in price. Prices are based on demand for these tokens. May I buy the token if my account is inactive?: YES! The option to purchase the token will additionally be on the character select menu if your character has the gold to purchase them. May I purchase the WoW Token with my local currency?: Tokens can only be purchased in US currency at the moment. If the system is trying to use Euros, For example, it's not going to go through - or indeed, give you that option. Will Recruit a Friend Work with these tokens?: YES! They will count just like game cards for your friend you recruited! I'm getting a grey button that states "Not enough Gold", But I'm certain I got the correct amount. What does this mean?: You would get this error in question if you have enough gold if there is not enough World of Warcraft Tokens for sale on the market. In this case, Please try again later when more are in-stock. Is there a limit of WoW Tokens I may purchase per month to sell?: Yup. The limit you may sell is capped at (10) tokens every (7) days. I spent the correct amount of gold, But did not receive the token? What do I do?: Blizzard is aware of this bug and the developers have announced that the gold spent would be returned to the person(s) that purchased the token off the Auction House! You should expect it to return via in-game mail. When buying a token can I use gold from both factions?: Yes. You may purchase the token using gold from both your Alliance and Horde characters! Please note though that the gold pulled from your character(s) all come from the same realm the character(s) are on. You cannot pull gold from multiple realms at this time! May I purchase tokens using my Battle.net Balance?: Yes, If you have the sufficient funds you will be able to! Xanlorash [The Insane] Looking for more World of Warcraft Token information - Please refer to post below! Thank-you!Xanlorash3 Apr 2, 2018

“As we’ve discussed before, the nature of WoW Classic sometimes invokes different memories for different players, and this leads to certain misconceptions for some about what is or isn’t working as intended,” Blizzard wrote in its official forums. While the developer did not reveal the specific numbers, there seemed to be too many bug reports for things that were actually working as intended.


The Horde levels 50-60 guide has been rewritten and revamped.  My 1-60 Horde leveling guide is now completely updated for the 1.12 Drums of War patch.  As you can see it is about 15% larger than the 40-50 guide (single largest guide page yet).  There is also a lot of route changes.  I moved the entire Silithus section from level 55 to level 58, which allowed me to include a lot more quests for that zone.  There is also a lot of other improvement to the route, including adding a lot more quests into the guide, mostly from Moonglade, Silithus and Eastern Plaguelands.  This will make the final level 59 grind much shorter.
This tutorial will ensure that the beginning of your journey will be a smooth one. It provides information that will help you find your way when you get lost, as well as tips that will offer guidance and advice as you march on towards greatness. It is not an exhaustive guide, however; it neither can nor wants to unveil every secret of Azeroth to you. That glorious task is left up to you as you explore the world yourself. Think of this guide as a touchstone for your early adventures: enough to get started, but too little to spoil any of the awesome surprises that await you in Azeroth.
So tonight I took the plunge and thought hey let me buy a Zygor Guides subscription to see how it is. A guide backed by a subscriber base paying for a premium experience this has to be great right? I was wrong. I tested it by loading it up on the Honorboud Rep Guide. Cool it tells me to do World Quests and Island Expeditions. So far so good but hang on... What about the Wanted Quests? Those are by far the biggest boost to reputation. It did not mention them at all. So I thought that's fine it's probably because BFA is quite new. Loaded up a leveling guide on an alt. It was a complete mess. The guide was telling me to accept quests that A) would be horribly inefficient to level with and B) I already done. I also started noticing weird performance issues. Zygor was causing stuttering and FPS dips like crazy. So to close off I requested a refund and the person I spoke to did say I'll be getting one but we will see if that happens. Not getting my hopes up.
Combat is turn-based and there is no time limit on each round in a PVE Pet Battle. You can take your time to determine which spell to use next. Some pet abilities have multiple round cooldowns, while others can do extra damage if certain conditions are met. Be creative and have fun testing which combination of attacks works best against different wild pets!
No he's just not paying attention. The wanted quests are built into both the leveling guides and the "Zandalar Forever" achievement guide. They aren't in the rep guide because they are not repeatable and by the time you hit max level they should be done. You'll also notice the rep guide doesn't contain every single possible completable quest that rewards rep. It is designed to focus on repeatable objectives, world quests, large quest lines, and missions.
I consider myself a purist in that I would prefer classic to be released as close as possible to the original. Where that is on the spectrum of patch content will be up to blizz. I'm also not vane enough to believe that any single state of the game is the "Ideal" location we should be aiming for. There is common ground that we can agree on, and I would welcome more than a few changes as long as they are made in the spirit of keeping classic on the vanilla rails.

Along with revealing the WoW Classic release date, Blizzard also listed plans for both a beta and stress test of the game. Players who opt-in for the testing on their account manager page and have an active subscription will be randomly selected for the beta starting May 15. Then the developer will have three stress tests where players can log in to play the game for a short period of time on the following dates:

This is definitely why we do a beta test. We can also do things like reset the realm at a busy time like 4:30pm PDT to try and find the source of a certain issue where a crocolisk is losing it’s brain due to how multiple processes are interacting and mirroring code to form a cohesive world. There were similar types of issues like this back in 2004 but we wanted to try and resolve this one before the weekend for the folks who are testing. (Blue Tracker / Official Forums)

I now have a Patreon Page where you guys can support me while I work on Vanilla WoW leveling guides every day.  I appreciate all of you who support me on there, it means a lot to me right now.  Doing this full time is taxing on my financial situation.  My goal is to make the best Vanilla WoW leveling guides on the web and the donations keep me going at it healthfully.  There is also cool rewards you get in return for donating.  Thanks!


WoW: Classic is scheduled for August 27 (technically August 26 if you're in the Americas). The soonest that you can play it is starting in May, during Blizzard's scheduled stress tests. To opt-in you must have an active subscription on your Battle.net account. If you do, go to Account Management and select the Wow Classic beta. Keep in mind, there will be level caps during the test. The schedule is as follows:
Nov 5 Yellow names I got killed by an undead character with a yellow name. I know some npcs are green and players on your side are blue. Is this an enemy player or an npc? I thought the undead and blood elves were on the same side but I think it might have been a player because he/she jumped over and over again on my corpse after I was dead. I'm really confused by this.Lithelilara12 Nov 5
Thanks for stopping by! I'm Crzypck, officer, Raid Leader, and tank of Mist on Area 52, and the official raid guide writer partnered with Limit, the US#1 and World #2 guild. This is the home page for Limit's Official Battle of Dazar'alor Mythic Raid Guide. Every strategy guide has been thoroughly discussed, reviewed, and approved by officers from Limit.
To me, certain character limits tend to be problematic not because of the length of actual content, but because of formatting tags and embedding taking up a lot of characters. This is something I experience on most of websites, not just this one, but the most aggravating issue over here is linking to user profiiles and other sources of strategies, which could be alleviated with internalisation of link paths and @mentions.

Things like Tauren melee reach being bigger, which is something I experienced going away live during Black Temple Illidan progression (at least for that particular encounter), is confusing to players as it's a significant advantage over other races in some instances. No quest tracking is another apparently confusing issue, as many Mankirk's WIfe seekers well know, and there's a whole lot more where that came from:
To me, certain character limits tend to be problematic not because of the length of actual content, but because of formatting tags and embedding taking up a lot of characters. This is something I experience on most of websites, not just this one, but the most aggravating issue over here is linking to user profiiles and other sources of strategies, which could be alleviated with internalisation of link paths and @mentions.
×